Profile Information

Following

My Chatter

james cook's picture
james cook

ok thank you buddy I will check out that site @JTR

45 sec ago
JTR's picture
JTR

iam thinking you have 2.78 count ring and then pinion I think you have39 & 14 39 by 14 = 2.78@james cook

27 min ago
JTR's picture
JTR

you can try this site to help you kevinstang.com/Ninecase.htm@james cook

30 min ago
james cook's picture
james cook

do you know what the gears are by the numbers buddy ????@JTR

38 min ago
james cook's picture
james cook

we pull it out of a 69 mustang and the housing looks a little smaller but I only truck Tipe 9inchers buddy @JTR

40 min ago
JTR's picture
JTR

are you sure it a 8 & not a 9 ? D =1970's 10 =71 or 1971 w =cougar ect. in those years they were usually 9 @james cook

1 hour ago
james cook's picture
james cook

Good morning gear heads on my first cup of coffee and planning what to do with my 8 inch pint is all most strip out the housing ....

1 hour ago
77camaro's picture
77camaro

well I'd look in to fuel delivery system issues.water in fuel ,air in lines,injectors bad...ect@sstephens

5 hours ago
james cook's picture
james cook

Do some one now ford gears I just got a ford 8 inch 31 spline out of a 69 GT mustang the ring gear say FORD SA D10W 4210A- 1439

12 hours ago
LugNut94's picture
LugNut94

I love 94 mustangs

12 hours ago

There are no tweets to display right now.

My Blog

fordtruckman1984's picture

fordtruckman1984
bronco roof before and after
read more
2 years ago | 325 views, 7 comments
fordtruckman1984's picture

fordtruckman1984
78-79 Bronco A/C Compressor Conversions

In order to build a AC/Air compressor you must follow three simple principles:

  1. You must have a need (or at least the need to point and say "hey guys, look what I built this weekend."
  2. You must have more time than money.
  3. It helps if you have most of the parts required sitting in your shop somewhere collecting dust.

The basic parts of the system are a stock type AC compressor with brackets, an air holding tank of some sort, pressure switch, relief valve and a on/off switch.

read more
3 years ago | 222 views, 1 comments
fordtruckman1984's picture

fordtruckman1984
Story Of "The Bronco"

I have always wanted a Bronco.  A few weeks ago, I was looking through the Cars & Trucks section of Craigslist and found this 1986 Bronco for really cheap.  It has a fuel-injected 302 with an AOD transmission and a Borg Warner 1345 transfer case.  I was really shocked, after getting it home and spending a couple of hours cleaning it up with a pressure washer, that it had very little rust on it.  The worst part of the rust is in the roof.  The roof needs to be replaced anyway because the previous owner tried to drive under a low-hanging tree branch and dente

read more
3 years ago | 244 views, 5 comments
fordtruckman1984's picture

fordtruckman1984
Story Of "The Bronco"

I have always wanted a Bronco.  A few weeks ago, I was looking through the Cars & Trucks section of Craigslist and found this 1986 Bronco for really cheap.  It has a fuel-injected 302 with an AOD transmission and a Borg Warner 1345 transfer case.  I was really shocked, after getting it home and spending a couple of hours cleaning it up with a pressure washer, that it had very little rust on it.  The worst part of the rust is in the roof.  The roof needs to be replaced anyway because the previous owner tried to drive under a low-hanging tree branch and dente

read more
3 years ago | 244 views, 5 comments
fordtruckman1984's picture

fordtruckman1984
Story Of "The Flatbed"

I first saw this truck in a field at a guy's house that I worked for in 2001.  It was a 1984 Ford F350 with a 4-barrel 460, backed by a C6 automatic transmission, and a Borg Warner 1345 transfer case.  One day I asked him what he was planning on doing with it, if he wanted to sell it and, if so, how much.  Months went by and I never got an answer.  I asked him again and he told me that he would get back with me soon.  A couple of weeks later he came up to me with a proposition.  He had a 2-story tin shed full of junk that he wanted torn down because he wan

read more
3 years ago | 274 views, 7 comments
fordtruckman1984's picture

fordtruckman1984
bronco roof before and after
read more
2 years ago | 325 views, 7 comments
fordtruckman1984's picture

fordtruckman1984
bronco roof before and after
read more
2 years ago | 325 views, 7 comments
fordtruckman1984's picture

fordtruckman1984
Story Of "The Flatbed"

I first saw this truck in a field at a guy's house that I worked for in 2001.  It was a 1984 Ford F350 with a 4-barrel 460, backed by a C6 automatic transmission, and a Borg Warner 1345 transfer case.  One day I asked him what he was planning on doing with it, if he wanted to sell it and, if so, how much.  Months went by and I never got an answer.  I asked him again and he told me that he would get back with me soon.  A couple of weeks later he came up to me with a proposition.  He had a 2-story tin shed full of junk that he wanted torn down because he wan

read more
3 years ago | 274 views, 7 comments
fordtruckman1984's picture

fordtruckman1984
Story Of "The Bronco"

I have always wanted a Bronco.  A few weeks ago, I was looking through the Cars & Trucks section of Craigslist and found this 1986 Bronco for really cheap.  It has a fuel-injected 302 with an AOD transmission and a Borg Warner 1345 transfer case.  I was really shocked, after getting it home and spending a couple of hours cleaning it up with a pressure washer, that it had very little rust on it.  The worst part of the rust is in the roof.  The roof needs to be replaced anyway because the previous owner tried to drive under a low-hanging tree branch and dente

read more
3 years ago | 244 views, 5 comments
fordtruckman1984's picture

fordtruckman1984
bronco roof before and after
read more
2 years ago | 325 views, 7 comments
fordtruckman1984's picture

fordtruckman1984
Story Of "The Flatbed"

I first saw this truck in a field at a guy's house that I worked for in 2001.  It was a 1984 Ford F350 with a 4-barrel 460, backed by a C6 automatic transmission, and a Borg Warner 1345 transfer case.  One day I asked him what he was planning on doing with it, if he wanted to sell it and, if so, how much.  Months went by and I never got an answer.  I asked him again and he told me that he would get back with me soon.  A couple of weeks later he came up to me with a proposition.  He had a 2-story tin shed full of junk that he wanted torn down because he wan

read more
3 years ago | 274 views, 7 comments
fordtruckman1984's picture

fordtruckman1984
Story Of "The Bronco"

I have always wanted a Bronco.  A few weeks ago, I was looking through the Cars & Trucks section of Craigslist and found this 1986 Bronco for really cheap.  It has a fuel-injected 302 with an AOD transmission and a Borg Warner 1345 transfer case.  I was really shocked, after getting it home and spending a couple of hours cleaning it up with a pressure washer, that it had very little rust on it.  The worst part of the rust is in the roof.  The roof needs to be replaced anyway because the previous owner tried to drive under a low-hanging tree branch and dente

read more
3 years ago | 244 views, 5 comments

Location

Javascript is required to view this map.